[pianotech] PianoDisc Malfunctioning Solenoids

[Garret Traylor]

Hi Bruce,
You should try to pass the customer over to a piano disk technician in your
area to see about pricing for a system upgrade.  Particularly since the slot
is already cut.  What system model is currently on the piano?  PDS 128?

Kindest Regards,

Garret 

---

Garret Traylor - President

High Point Piano & Music Inc.

88-PIANO (336) 887-4266

P Go Green! Print this email only when necessary. Thank you for helping High
Point Music be environmentally responsible.

 

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Bruce Gibson Piano Technician
Sent: Saturday, March 20, 2010 11:36 AM
To: pianotech at ptg.org
Subject: [pianotech] PianoDisc Malfunctioning Solenoids

 

Hello everyone.

 

I have a client with solenoids that will not budge on their PianoDisc, no
matter how hard I pull up on them.

 

I haven't got a clue what to do with this situation, and the darn thing is
off warranty.

 

Any thoughts/advice would be much appreciated.

 

Bruce

Saskatoon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100320/6c0d97d0/attachment.htm>