[pianotech] CA treatment for loose brass bookholders?

[Joe Goss]

Yes, but do not fill the hole or you will be drilling the hole out.
Using thin works best for me as the glue wicks into the wood quickly and 
sets up pronto so you can screw parts together immediately.
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "David Boyce" <David at piano.plus.com>
To: <pianotech at ptg.org>
Sent: Friday, March 05, 2010 3:15 PM
Subject: [pianotech] CA treatment for loose brass bookholders?


>I wondered if anyone has tried CA to tighten loose L-shaped screw-in brass 
>bookholders in upright music desks?  I've used shims of various things over 
>the years, but since CA seems to be so effective for pinblocks, I wondered 
>if it might work for this too?
>
> Best regards,
>
> David Boyce