[pianotech] Gluing Damper Felt

[Rob McCall]

I hope I'm avoiding a protocol gaffe, but is there any chance that one of you can post the PDF on here?  I'm sure Nina Butler might appreciate NOT getting 1,000 emails asking for the same thing... :-)

Regards,

Rob McCall

McCall Piano Service, LLC
www.mccallpiano.com
Murrieta, CA
951-698-1875



On Feb 27, 2010, at 13:23 , reggaepass at aol.com wrote:

> I also got the PDF.  Looks very promising.  I'm considering putting one on a D, complete with sos. rod migration to bellyrail.
>  
> Alan Eder
> 
> 
> 
> -----Original Message-----
> From: William Truitt <surfdog at metrocast.net>
> To: pianotech at ptg.org
> Sent: Sat, Feb 27, 2010 12:59 pm
> Subject: Re: [pianotech] Gluing Damper Felt
> 
> Nina Butler sent me the PDF when I asked her about it when inquiring about something else.  That’s how I got my copy.  I am sure she would do the same for you, although I would imagine it will be on the web site eventually.   It’s about 16 pages, has the CAD drawings and  all.  I believe they will be selling it to us for about $600.  They can drill and tap the rails for the screws if you want them to also.  Two different size trays and mounting blocks.  Two different sizes of underlever top flanges.  Three different length lift spoons.  They can sell you a belly rail wall mountable sostuenuto system as part of that too.
>  
> Will
>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100227/97b0edc1/attachment.htm>