[pianotech] Hale Extension Rod

[David Ilvedson]

For the rare time it is necessary, I have a few other hammers in the car.   Thin-walled tip hammer, oblong tip (but I don't do squares anymore, so that goes into the shop).   I have a Yamaha hammer with a more than long enough tip for anything...

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Terry Farrell" <mfarrel2 at tampabay.rr.com>
To: pianotech at ptg.org
Received: 2/27/2010 9:29:11 AM
Subject: Re: [pianotech] Hale Extension Rod


>Ditto for me - except #1 tip for #1 pins, and sometimes a #3 for an  
>oldie that has been repinned four times and an extension sometimes for  
>uprights with an overhanging top or sometimes for a grand that has the  
>treble end up against a wall.

>Terry Farrell

>On Feb 27, 2010, at 12:26 PM, Ron Nossaman wrote:

>> I like simple. Same setup for everything.
>> Ron N