[pianotech] finishing a plate

[Joseph Garrett]

Dave,
Talk about being dyslectic! Let me be specific! (Sheesh!) When the human
fingernails, (that sorely need to be filed), gouge into the wood of the key
stick of the sharp, it leaves bare wood. This wood needs to be colored
black, AGAIN!
Get it?
Good,
Joe

Joe Garrett, R.P.T. (Oregon)
Captain, Tool Police
Squares R I



> [Original Message]
> From: David Ilvedson <ilvey at sbcglobal.net>
> To: <pianotech at ptg.org>; <joegarrett at earthlink.net>
> Date: 2/25/10 1:07:48 PM
> Subject: Re: [pianotech] finishing a plate
>
> If the fingers are getting gouged on the sharp keysticks, you should sand
the edges...
>
> David Ilvedson, RPT
> Pacifica, CA  94044
>
> ----- Original message ----------------------------------------
> From: "Joseph Garrett" <joegarrett at earthlink.net>
> To: pianotech at ptg.org
> Received: 2/25/2010 8:19:45 AM
> Subject: Re: [pianotech] finishing a plate
>
>
> >Ooops! Forgot to say that I use Mohawk Black touch up pens for the
lettering. I also 
> >use that for covering the finger gouges on sharp keysticks. It's an easy
applicator 
> >thingee.<G>
> >Joe
>
>
> >Joe Garrett, R.P.T. (Oregon)
> >Captain, Tool Police
> >Squares R I
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG. 
> Version: 7.5.560 / Virus Database: 270.12.26/2116 - Release Date: 5/15/09
6:16 AM