Why don¹t you just adjust the tension, so that it is correct? It is always advisable, to adjust the springs after installation, to even them out. Or as I sometimes do, am I missing something? John Ross Windsor, Nova Scotia On 22/02/10 3:03 PM, "Garret Traylor" <hpp at highpointpiano.com> wrote: > Can someone tell me the proper hammer return spring size diameter for a > Kimball console. I have an instrument in my store that has had the springs > replaced but they are way too strong and will need to be down sized. > Kindest Regards, > Garret > --- > Garret Traylor - President > High Point Piano & Music Inc. > 88-PIANO (336) 887-4266 > P Go Green! Print this email only when necessary. Thank you for helping High > Point Music be environmentally responsible. > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100222/732d4218/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC