[pianotech] Yamaha Hammer Suggestion

Paul T Williams pwilliams4 at unlnotes.unl.edu
Fri Feb 5 11:56:42 MST 2010


Randy,

I've never tried the pre-hung Steinway hammers, but have thought about 
doing it as I have time crunches with certain classroom or professor 
studios here at Univ of NE.  What goes wrong with them?  I'm curious. I've 
never heard a negative comment about them, nor do I know anyone that has 
ordered them, personally.   Has anyone else out there ordered pre-hung?

Best,
Paul




From:
Randy Chastain <Randy_Chastain at sbcglobal.net>
To:
pianotech at ptg.org
Date:
02/05/2010 11:59 AM
Subject:
Re: [pianotech] Yamaha Hammer Suggestion



Tom,
I like your two cents and from having almost completed today a hammer job 
for a Steinway L with Steinway hammers (request of owner) , thank you for 
bringing up part of the detailed process and skill it takes to do a good 
and proper job.  The attention to detail can be overlooked for sure by 
some and end up with a bigger problem. The hard work starts at the 
beginning no matter who you get your parts from. Its the detailed work 
that pays off. I still hear of techs who buy, for example pre hung 
Steinway hammers :( . I did that once early on and, oh my gosh!!!Never, 
never again. 

I would be very interested in how you or anybody else find the proper 
hammer line/sweet spot. I can ALWAYS learn something. I have one of those 
diseases that I have to keep learning. There's just so much out there that 
I can't help myself. I live in the San Francisco bay area and I wish there 
was a better way for me to continue to learn after 15 years of this. I 
have it. 

Randy Chastain




On Feb 5, 2010, at 2:26 AM, Tom Servinsky wrote:

> Steven
> I'll throw my 2 cents in on this one.
> Truth be  told, there are many types of hammers that could work for this 
piano. With good voicing techniques and a good understanding how many 
different types of hammers respond, one can get the sound of the piano to 
be clear and full bodied. That being said, it's all  a matter of how much 
time and effort you want to make.
> Although I  have my go-to hammers I prefer, I finding more and more it's 
more of doing an exquisite hanging job that makes for a nice sounding C7. 
Taking the time to make sure that the traveling is dead-on, and your 
hammer strike line reflects that of the sweet spots of the piano will lay 
the grounds for a nice voicing experience. It's when the strike line is 
not in check with the piano that we end treating the symptoms and not the 
disease. I've seen countless techs spending too much time trying to 
overcome the problems of a bad strike line or poor traveling.
> Tom Servinsky
> ----- Original Message ----- From: "David Ilvedson" 
<ilvey at sbcglobal.net>
> To: <pianotech at ptg.org>
> Sent: Friday, February 05, 2010 12:12 AM
> Subject: Re: [pianotech] Yamaha Hammer Suggestion
> 
> 
>> No offense to anyone in particular...OK?...but this idea that any piano 
hammer can be hung and sounds great right off the bat...well, I've got a 
problem with that.   I think we need a little more education in voicing...
>> 
>> David Ilvedson, RPT
>> Pacifica, CA  94044
>> 
>> ----- Original message ----------------------------------------
>> From: "John Dever" <jazzman3743 at live.com>
>> To: pianotech at ptg.org
>> Received: 2/4/2010 4:13:11 PM
>> Subject: Re: [pianotech] Yamaha Hammer Suggestion
>> 
>> 
>> 
>>> Ari Isaac Cadenza "S" Hammers.
>> 
>>> I just had a set installed on my Petrof
>> 
>>> Nice right out of the box.
>> 
>>> JD
>>> 
>> 
>> 
>>> From: hoppsmusic at hotmail.com
>>> To: pianotech at ptg.org
>>> Date: Thu, 4 Feb 2010 02:49:37 +0000
>>> Subject: [pianotech] Yamaha Hammer Suggestion
>> 
>> 
>> 
>>> Hello List,
>>> 
>>> I am looking for a suggestion of new hammers for a Yamaha C7.  It will 
be used in a
>>> small hall (seating less than 300).  The preference would be for as 
full and rich a
>>> sound as possible with a crisp high treble.  I would hope for hammers 
that would not
>>> need extensive voicing immediately.
>>> 
>>> Has anyone replaced hammers and have any experience or suggestions?
>>> 
>>> Thanks,
>>> 
>>> Steven Hopp
>>> Midland, TX
>> 
>> 
>> 
>>> Hotmail: Trusted email with powerful SPAM protection. Sign up now.
>>> 
>>> _________________________________________________________________
>>> Hotmail: Trusted email with powerful SPAM protection.
>>> http://clk.atdmt.com/GBL/go/201469227/direct/01/ 
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100205/b7875d4d/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC