I think you mean the nameboard, which is the board that spans the keys betwwen the cheek blocks. Remove the 2 screws and the ends and tip it toward the action and down a bit and it should slide out between the cheek blocks and the Thayer flange rail that seems to have it trapped. Bill Schlipf Bloomington, IL Please note: message attached From: "Clayton Bean's Piano Biz" <pianobiz at verizon.net> To: <pianotech at ptg.org> Subject: [pianotech] Wurlitzer Spinet key rail removal Date: Mon, 01 Feb 2010 16:35:29 -0500 ____________________________________________________________ Nutrition Improve your career health. Click now to study nutrition! http://thirdpartyoffers.juno.com/TGL2131/c?cp=eakGQoF2T3n7E9-rFzZV0gAAJz1utuDroy30iobj4ZCrBRnSAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAASQwAAAAA= -------------- next part -------------- An embedded message was scrubbed... From: "Clayton Bean's Piano Biz" <pianobiz at verizon.net> Subject: [pianotech] Wurlitzer Spinet key rail removal Date: Mon, 01 Feb 2010 16:35:29 -0500 Size: 7318 URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100201/9009617d/attachment-0001.eml>
This PTG archive page provided courtesy of Moy Piano Service, LLC