[pianotech] Regulation sequence advice sought

Joe Goss imatunr at srvinet.com
Tue Aug 31 11:48:22 MDT 2010


That you asked shows you already know the answer <G>
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: limhseng at gmail.com 
  To: pianotech at ptg.org 
  Sent: Tuesday, August 31, 2010 11:48 PM
  Subject: Re: [pianotech] Regulation sequence advice sought


  Hi Joe
  Can you enlighten me on your statement? I see the light in Barbara's statement. Or should we just 'let it be'? :)
  Lim 
  Sent from my BlackBerry Wireless Handheld 
  Powered by Gee! from StarHub


------------------------------------------------------------------------------

  From: "Joe Goss" <imatunr at srvinet.com> 
  Sender: pianotech-bounces at ptg.org 
  Date: Tue, 31 Aug 2010 08:24:49 -0600
  To: <pianotech at ptg.org>
  ReplyTo: pianotech at ptg.org 
  Subject: Re: [pianotech] Regulation sequence advice sought


  "When you move a mountain it affects the weather on both sides of the mountain".
  Joe Goss BSMusEd MMusEd RPT
  imatunr at srvinet.com
  www.mothergoosetools.com
    ----- Original Message ----- 
    From: Barbara Richmond 
    To: pianotech at ptg.org 
    Sent: Tuesday, August 31, 2010 7:45 AM
    Subject: Re: [pianotech] Regulation sequence advice sought


    hi Michael,

    *One* way to develop a better understanding of grand regulation/how a grand action works is to focus on the jack and how it is affected by each step of regulation.  (LaRoy Edwards suggested that decades ago when I was at Little Red School House.)  So, when you are doing your steps (I think there is value in knowing a sequence) and things start going wrong, stop, take a good look--what's the jack's position, is it not moving enough, is the jack moving too far, is it stuck?  Why?  

    It takes a lot of practice.  Every time you figure out one problem, it will help you solve the next one coming up!

    Barbara Richmond, RPT
    near Peoria, Illinois


    ----- Original Message -----
    From: "Michael Staples" <mastaples at gmail.com>
    To: pianotech at ptg.org
    Sent: Tuesday, August 31, 2010 6:56:00 AM
    Subject: [pianotech] Regulation sequence advice sought


    Thanks Ron,

    That's another piece of the puzzle I need to understand.  Speaking of understanding, I was pretty easily convinced off line that I should be studying towards an integrated understanding of grand action relationships instead of memorizing steps to accomplish regulation.  In the practice I have already done, I've experienced that if things start to go wrong during regulation, my only tool to fix things is to start the sequence all over.  So, help me out here, what source or study method can I use to gain this understanding?

    Michael Staples
    PTG Associate member

    >You're not there to learn to regulate action models. You're there using 
    a model to try to learn to regulate a real piano action. Al's suggestion 
    related to real pianos. Perspective...

    >Otherwise, since check height will affect hammer rise, I'd make sure of 
    going over rep spring strength again after setting checking. Yes, I 
    know, you should be looping through the process until everything checks 
    out. The point isn't to do all the procedures through three iterations, 
    but to check all procedures and do them again as necessary until you 
    can't find anything wrong enough by your standards to mess with. 
    Whatever you do, there will always be someone who thinks it's not good 
    enough, and someone who thinks you're wasting time taking it that far. 
    You'll never know what's "right", but you can try to correct everything 
    that appears to be wrong. The end user will decide how you did.
    Ron N


----------------------------------------------------------------------------


      a.. Previous message: [pianotech] Regulation sequence advice sought 
      b.. Next message: [pianotech] Treble & Bass bridge 
      c.. Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 

----------------------------------------------------------------------------

    More information about the pianotech mailing list

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100831/973fe16b/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC