[pianotech] Petrof #14 wire

[mario at pianosinsideout.com]

They use European #14 wire, which is .825mm diameter, and the American size
(e.g. Mapes) is .838mm or .033". Either will work.
 
Mario Igrec

  _____  

From: Al Guecia/AlliedPianoCraft [mailto:AlliedPianoCraft at hotmail.com] 
Sent: Wednesday, August 25, 2010 11:36 AM
To: Pianotech List
Subject: [pianotech] Petrof #14 wire


I removed a broken wire from a Petrof vertical. It was stamped #14 wire on
the bridge, but I didn't check the wire with a micrometer and I misplaced
the wire. Dose anyone know what wire gauge sizes they use? US? Metric?
 
Thanks,
 
Al - 
High Point, NC  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100825/3f442dda/attachment.htm>