[pianotech] Schulze-pullman piano

[Qshooterq at aol.com]

Les, A local dealer sells Schulze Pullman uprights.   I have tuned a few 
(not for him) and found them to be great pianos with good pin blocks.    
---Tom Gorley

In a message dated 8/22/10 8:22:06 PM, l-bartlett at sbcglobal.net writes:
> 
> I just tuned my first Schulze Pullman piano, and found the majority of 
> tuning pins seemed awfully loose, so torqued a number of pins, the worst 
> offenders being below 20 in/lb donward pull from twelve o’clock position.  I 
> would appreciate knowing more about the brand, which is nothing, and I seem to 
> find nothing except the company web site.  I’ve given my measurements to 
> the owner, who will be going back to New York this week, and stopping in to 
> see the dealer.  Is there information about the brand which would be 
> helpful for me, gleaned by others who have experience with this brand. It’s an 
> upright, but I didn’t write model number down, so can’t say which of two 
> models it is.
>  Thanks
>  Les bartlett
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100823/d123bf39/attachment.htm>