What about using the .146 and then cover it with teflon shrink tubing to make it tighter. They make this in different thicknesses - down to .0015. Might be worth a try. Or check with a machinist and see if they can make you some. Ryan On Wed, Aug 18, 2010 at 10:09 PM, Carlos Ralon <ceralon at comcast.net> wrote: > List, > Badly needed. I'm working on a 1930's small Knabe Grd. I need new balance > rail pins size > .150 x 2". Shaff only has .146 & .160 x 2 1/4 & 2 5/8 long. The .146 are > too small and the .160 much too big for the holes and especialy the keys. > Pianotech also no go on sizes according to their catalog. Anyone know of a > supplier with these sizes or help me with a solution. Thanks. > Carlos Ralon, RPT > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100818/72a3c6a8/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC