You can also change the pitch of individual bars by heating and applying solder to the end of a rod, then carefully file off the solder until the proper pitch is achieved. It does sound like a Schoenhut system, and they will sell you the correct set of tone bars. They're not expensive and will save you a lot of work. They will need tuning however.
Mike Kurta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100815/53ad9f67/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC