When I change it to inches the key height would be about 2.51968504". It is 2 3/8". Hammer blow at inches is 1,81102392 so 1.8" Thank you, John Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca ----- Original Message ----- From: Paul T Williams To: pianotech at ptg.org Sent: Friday, August 13, 2010 5:27 PM Subject: Re: [pianotech] Petrof Specs Do you have the Randy Potter Piano Action Handbook? It says: Key height: 64mm Sharp height: 12.3mm, Blow at 46mm, letoff at 3-1.5mm, Key dip at 10mm, and backcheck distance at 15mm. I would say your 1-7/8" blow is too low. Paul From: jrpiano <jrpiano at eastlink.ca> To: Pianotech List <pianotech at ptg.org> Date: 08/13/2010 02:54 PM Subject: [pianotech] Petrof Specs ------------------------------------------------------------------------------ I need the help of the list again. I have a Petrof small grand I am trying to regulate. When I try hammer to string of 1 7/8" the hammer rests on the rail. When I measured the key height, it is 2 3/8" not 2 1/2". Anyone know what it is supposed to be? Thank you, John Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3068 - Release Date: 08/13/10 03:34:00 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100813/9d5296f6/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC