[pianotech] Schaff compatable tuning lever heads-tips

[Joe Goss]

Hi Scott. Not on the tips.
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Scott Jackson" <scottwaynejackson at hotmail.com>
To: <pianotech at ptg.org>
Sent: Sunday, September 27, 2009 5:08 AM
Subject: Re: [pianotech] Schaff compatable tuning lever heads-tips


> Tom,
> What are you trying to do? I believe that all the major brand heads use 
> 1/8" National Pipe Thread Taper (NPT).
>
> Scott Jackson
>