[pianotech] Erwins key dip gauge

[erwinspiano at aol.com]

?right as rain, Ron. Or is it right as Ron,?rain?!...Whatever
? Dale


-----Original Message-----
From: Ron Nossaman <rnossaman at cox.net>
To: pianotech at ptg.org
Sent: Sat, 28 Feb 2009 11:17 am
Subject: Re: [pianotech] Erwins key dip gauge


> The .370" just forward of the front rail pin will be more than .370" at > the front of the key. I dunno how much.?
> > Paul Bruesch?
?
It depends on the key dimensions. Shorter keys will show greater difference in dip between key pin and front. Measuring at, or at the front edge of, the pin makes the most sense. Works for both sharps and naturals with a minimum of...?
?
Then you refine your choice of adjustment(s) to even out the feel to your satisfaction - by feel, rather than measurement.?
Ron N?
?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090228/8d7046a5/attachment.html>