Another approach to this adjustment is bending the spoon rather than trying to poke something in between the dowels. I haven't done it but it's on my list to fashion a spoon bender out of brass rod. Tom Cole pcpoulson at sbcglobal.net wrote: > I sympathize with the frustration about the lack of space between > letoff dowels. However, I am wondering if reducing the diameter of the > dowel would lead to cracking after a number of years of use. This is > an occasional problem on uprights, and it seems that thinning the > dowel would only make the problem more likely. > Patrick C. Poulson > Registered Piano Technician > Piano Technicians Guild
This PTG archive page provided courtesy of Moy Piano Service, LLC