[pianotech] workbench

[Al Guecia/AlliedPianoCraft]

Jon, looks more like a storage shelf to me. <G>

anon

--------------------------------------------------
From: "Jon Page" <jonpage at comcast.net>
Sent: Wednesday, February 25, 2009 7:32 AM
To: <pianotech at ptg.org>
Subject: Re: [pianotech] workbench

> If you have the top, make the legs out of 2x10's (or 12's). You can
> make them to any height you desire.
> Fashion a 45 degree cut for the ends and bang in an old upright
> caster for the bottom.
>
> My bench is made from the keybed of a 7' Zimmerman square grand.
> I've made a couple of these and
> gave one to another tech. I save the trophy to mount.
> -- 
>
> Regards,
>
> Jon Page