[pianotech] WNG Backchecks

[Ed Sutton]

With a bit of clever mini-woodworking, you can probably add a piece of wood to the hammer tails.
If you have the WNG tail shaping jig, it should give results that leave you chuckling.

Or, perhaps you can return the hammers for something with a longer molding.

Ed S.
  ----- Original Message ----- 
  From: Gene Nelson 
  To: pianotech at ptg.org 
  Sent: Saturday, February 14, 2009 4:35 PM
  Subject: [pianotech] WNG Backchecks


  Hello list,
  While trying to get ready for installation of my first WNG Backcheck set I discover that my hammer set (purchased uncut, unbored & uncoved) is not long enough (especially in the upper bass)  to get the 25.4mm beyond bore distance. 
  Anyone else get a chance to work with these yet? Have similar issues?
  Gene
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090214/fbe3ad35/attachment.html>