I would not. Straighten the string and bring it through. James James Grebe Since 1962 Piano Tuning & Repair Creator of Handsome Hardwood Products( 314) 608-4137 1526 Raspberry Lane Arnold, MO 63010 Researcher of St. Louis Theatre History BECOME WHAT YOU BELIEVE! www.grebepiano.com ----- Original Message ----- From: "Brian Doepke" <bdoepke at verizon.net> To: <pianotech at ptg.org> Sent: Thursday, February 12, 2009 6:05 PM Subject: [pianotech] Ooops... > When replacing a broken string on a console, I accidentally threaded the > new > string under the pressure bar but on the wrong side of one of the screws > that hold down the pressure bar. > > > > Can I remove the screw and then slide the string over and then replace the > screw? > > > > Brian P. Doepke, RPT > > A.A.A. Piano Works, LLC > > Piano Tuning + Service > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC