"They thoughtfully made it easy to pull the action" Wim, as I read it, he wants to know how to remove the keys. Al From: wimblees at aol.com Sent: Sunday, February 08, 2009 2:27 AM To: pianotech at ptg.org Subject: Re: [pianotech] George Steck Spinet Paul I've seen one of these pianos before. Remove the bottom panel, and you'll discover that the wippens are not attached to the stickers. All you have to do is remove the action bracket screws, and action will lift right out, leaving the stickers in the piano, attached to the keys. Willem (Wim) Blees, RPT Piano Tuner/Technician Mililani, Oahu, HI 808-349-2943 Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: paul bruesch <paul at bruesch.net> To: Pianotech List <pianotech at ptg.org> Sent: Sat, 7 Feb 2009 11:19 am Subject: [pianotech] George Steck Spinet Anyone have a trick to removing the drop wires from the keys of this type George Steck spinet (see attached photo)? I mean other than the obvious unscrewing 88 dowels. They thoughtfully made it easy to pull the action... but I'm thinking maybe they compromised on the ease of removing keys! Paul Bruesch Stillwater, MN ------------------------------------------------------------------------------ A Good Credit Score is 700 or Above. See yours in just 2 easy steps! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090208/43e789ab/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC