[pianotech] bridle wires

[Keith McGavern]

Scott, List,
Had a situation where this fix needs done on a Baldwin Acrosonic,  
early '70s' vintage.
Question:
I am curious as to what size diameter shrink tubing you choose to use,  
1/8" or 1/32"?
I am currently experimenting with the concept of using shrink tubing  
activity for this procedure.
Keith
> I have used small-diameter shrink tubing on this type of bridle  
> wires to
> keep the bridle straps from sliding down off the "crook". Just cut the
> tubing into little 1/4" lengths, slide it over the bridle wire so  
> the top
> end is just about where you want the bridle strap to sit, and shrink  
> it
> onto the wire. ……
>
> ------
> Scott A. Helms, Registered Piano Technician
> 480-818-3871
> www.helmsmusic.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090817/55e40569/attachment.htm>