I found it: http://www.merritts.com/store4/public/product.aspx?ProductID=81450&SearchText=oiler I bought a dozen...they are not particularly durable...no problem if you have a place in your kit so they don't bounce around... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "John Ross" <jrpiano at win.eastlink.ca> To: pianotech at ptg.org Received: 8/17/2009 9:34:01 AM Subject: Re: [pianotech] Lubing Jack Flanges in Uprights >Syringe, with needle, lets you put stuff where you want. >John Ross >Windsor, Nova Scotia > ----- Original Message ----- > From: Amadeus Piano > To: pianotech at ptg.org > Sent: Monday, August 17, 2009 12:57 PM > Subject: [pianotech] Lubing Jack Flanges in Uprights > Hello all, > > I'm looking for advice on the best way to lube the jack flanges on a 70s Story & >Clark console piano. Is it necessary to remove the wippens to do this properly? It's >all pretty tight. > > This piano has a handful of notes skipping-plays the first few times, then stops >playing, key goes up and down but hammer doesn't jump forward. The jack's not >resetting. > > I believe the likely culprit is the jack flange or maybe even the jack spring. (The >keys appear to work ok-the fronts come up nicely, bushings don't seem too tight, no >rubbing against neighbors; the wippen cushions appear ok, the capstans appear well >regulated, etc.). > > And because it sat un-serviced and un-played for so long, I'd like to lube all the >flanges. > > I have Protek but I don't have any sort of long wand to spray it, carefully, that far >back. > > Thanks in advance for any assistance, Gary > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC