[pianotech] spring steel split mute (was Pitch raise criteria)

[David Ilvedson]

test

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Scott Jackson" <scottwaynejackson at hotmail.com>
To: pianotech at ptg.org
Received: 8/4/2009 8:36:09 PM
Subject: Re: [pianotech] spring steel split mute (was Pitch raise criteria)


>Joe,
>What is a spring steel split mute? And where do I get one? I normally use a Papps 
>mute for the tri-chords, and whatever fits best for the bi-chords.

>Scott Jackson

>  ----- Original Message ----- 
>  From: Joe Goss 
>  To: pianotech at ptg.org 
>  Sent: Wednesday, August 05, 2009 3:07 AM
>  Subject: Re: [pianotech] Pitch raise criteria


>  Hi,
>  Each time I read others comments on pitch raising I am reminded of the futile 
>attempts and 

>  The above is done with a wide rubber mute and the spring steel split mute. This 
>mute works like the pap mute without the metal attack.
>  Joe Goss