Hi List,Since I didn't like to have attached hoses to keep pressure in the clamping hoses, I used a standard cap that I drilled to accept truck tire valves. The store assured me that these valves were good for 150 psi. So I just fill the hose ahd then I can walk around the board without jumping over or crawling under the air hoses.I've attached a pic.Marcel Carey _________________________________________________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080928/a0fe6cfc/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: hose cap.jpg Type: image/jpeg Size: 56622 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080928/a0fe6cfc/attachment-0001.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC