David Love wrote: > Has that actually happened to you? Sure has, maybe a half dozen times total, with varying degrees of damage. >I've hit staples, or the edges of them, > on several occasions without any adverse effect. Abel hammers (which I > don't use that often) or notorious for large staples the extend out to the > edges of the hammer. It's almost impossible not to hit them when doing a > full taper which tends to push them away from the hammer a bit. I just push > them back down and there seems to be no real consequence for the stability > of the hammer. I might hit six or seven staples through multiple sets with no problem. It's the odd one that isn't not a problem that's the problem. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC