>If the pins have walked out is it an absolute that they should be repinned, >or is it just a case of no one ever tightened those metal tab screws? The screw become loose over time. Depending on the amount the pin has drifted, one side will be looser than the other. But if once you press the pin back in and there is no knocking then the pinning will survive. Press them in, tighten the tabs and get on to other projects. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080903/5e7c7d7c/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC