Powdered graphite, rubbed in for the valve slides, is that still the way to go? I hadn't thought on nothing for the shaft. I guess I don't think enough. :-( Thanks Ron. John ----- Original Message ----- From: "Ron Nossaman" <rnossaman at cox.net> To: "Pianotech List" <pianotech at ptg.org> Sent: Wednesday, September 03, 2008 2:08 PM Subject: Re: Re Player Air Motor > >> *When rebuilding an air motor, I have always used powdered graphite on >> the felt bushings on the shaft.* >> *Is that still the preferred way, or is powdered teflon being used?* >> *John M.Ross >> Windsor, Nova Scotia, Canada.* > > Teflon's fine, or Protek, or Goose Juice, or silicone/naphtha, or nothing > at all. > Ron N > John M.Ross Windsor, Nova Scotia, Canada.
This PTG archive page provided courtesy of Moy Piano Service, LLC