Now Ron, I really expected you to take umbrage at the reference to your "two-bit method." AnonAnon On Tue, Sep 2, 2008 at 9:11 PM, Ron Nossaman <rnossaman at cox.net> wrote: > > To ream or not to ream, that is the question. >> >> I seem to recall from the initial post that there were two sizes >> of pins in this block. >> > > Correct, which precludes ignoring the reaming pass. > > > In that case you would have to determine the appropriate >> drill bit to use to suit your new pins. >> >> I would also encourage you to look into Ron's two-bit method. >> > > The first pass hole's already there. This would be pass two. > > > If 2/0 were in there and were comfortably secure, I'd go with >> 3/0 throughout and ream accordingly to the density of the block. >> > > A reasonable approach. > Ron N > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080902/bdc1556f/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC