New WNG carbon fiber action parts

erwinspiano at aol.com erwinspiano at aol.com
Sun Oct 12 17:38:11 MDT 2008


?? Hey Jude
? What about the tokiwa wippens?
? Dale





Jude,?
?
Main problems are: 1) Wippen rail needs to be relieved to clear bottome of wippen, otherwise the rail holds the wippen up off of the capstain. 2) The Wippen has a cast-in boss for assist springs, which interferes with the hammer tail. We'll have to cut off the spring boss. They suggested coving out the hammer a little more, but we'd rather have reliable checking. 3) Let-off button adjustment will be nearly bottomed out - we'll need to replace with longer buttons. 4) Drop screws will be turned down so low they'll be buried - we'll have to install thicker cushion on the rep lever. As to the suggestion to check the action spread, can't increase it because of the spring boss - hammer tail interference, and can't decrease it or the jack tender will be off the edge of the let-off button. I'll try to find the photos. We've test regulated samples of black WNG, new Renner, and the original WNG parts?
in all possible combinations, and the black WNG wippens cause problems in any combination, while the original WNG wippens work best and the Renner wippens are acceptable.?
?
Mike?
?
Jude Reveley/Absolute Piano wrote:?
> Hi Mike,?
>?
> I've successfully installed the WNG parts on my M&H A 29783 (1921). > What sort of issues are you having? Any pictures??
>?
> Jude Reveley, RPT?
> Absolute Piano Restoration, LLC?
> Lowell, Massachusetts?
> (978) 323-4545?
>?
> ----- Original Message ----- From: "Mike Spalding" > <mike.spalding1 at verizon.net>?
> To: "Pianotech" <pianotech at ptg.org>?
> Sent: Friday, October 10, 2008 9:32 PM?
> Subject: New WNG carbon fiber action parts?
>?
>?
>> List,?
>>?
>> Has anybody out there successfully installed a set of the new black >> plastic WNG shanks and wips in an older M&H action? We've obtained a >> set of these parts for a 1920's vintage A, and it appears we must >> make significant alterations to the wippens, and to the wippen rail, >> in order to make these parts work. Response from WNG hasn't solved >> any of the problems ("check the action spread" - like the tech help >> guy whose first response to any problem is to tell you to reboot your >> computer) Thought I'd check with the larger community to see if our >> experience is unique, or if anybody has some constructive advice...?
>>?
>> thanks?
>>?
>> Mike?
>>?
>>?
>?
>?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20081012/5f815071/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC