Copy rights. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Scott Jackson" <scottwaynejackson at hotmail.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Sunday, March 09, 2008 1:47 AM Subject: Re: Steinway model Z weak bass > Wouldn't you know it? My one customer that has a Samick/Conover Cable CC118 > with this lift-up lid, also has scalop wall lights right above the piano. I > nearly broke one when I thought that I would raise the top rather than > remove it. Of course, it's also on a wooden floor with caster cups, so next > tuning I'll investigate swapping the hinge pin. > > Why didn't Samick just copy Yamaha's 90° turnable hinge-pin idea? > > Scott Jackson > > > ----- Original Message ----- > From: piano57 at insightbb.com > > enough for me. I bring a good sized dowel with pins on each end and use it > as a lid prop. A pedal rod/dowel will work in a pinch, but the stick should > really be a bit longer. >
This PTG archive page provided courtesy of Moy Piano Service, LLC