pitman retrofit

[Garret Traylor]

Do you by chance have some pictures of your retrofit in the piano (different
perspective)?
Kindest Regards,
Garret 
---

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Jon Page
Sent: Thursday, June 12, 2008 7:54 AM
To: pianotech at ptg.org
Subject: pitman retrofit

I've been using this method for years. The rod is scrap pedal rod and there
is no need to remove the felt lining the hole. The old pitman is measured
and the rod is cut to length accordingly.
There are no holes to drill in the lever or tray, simply position and glue
the end blocks with the rod in place.
-- 

Regards,

Jon Page