> > Hi Kerry, > Aside from the unlikelihood of being able to physically get > the tuning tool on the bottom pin row and have enough swing > room to do the deed, I think it's pretty slick. I can't really > tell from the photo, but it looks like (and seems reasonable > that) the socket in the tuning wrench is oriented something > between 45° and 90°, so it can be flipped over to get an > effective eight point bite from a four point wrench, for that > reason. An eight point socket at half that angle offset would > be even better. > > How did the mechanics of turning pins go? > > Ron N [(Kerry Replys)] The tuning went well, as you assumed, you can get a good bite on the pins and they do not need much to adjust the tension. Kerry Cooper
This PTG archive page provided courtesy of Moy Piano Service, LLC