On the one that I service it had autoharp size pins on the fine tuner and regular pins on the other. They hopefully do not have that piano any more. It was one of the most used up instruments I had seen for a while. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: Marcel Carey To: Pianotech List Sent: Wednesday, July 23, 2008 9:30 AM Subject: RE: very strange tuning mechanism HI Joe, No, the pins were standard, but they had some kind of contraption (half of a washer) that would push the wire towards the block in the non speaking length. It's been a while but next time (il they ever call) I'll take pictures. Marcel ------------------------------------------------------------------------------ From: imatunr at srvinet.com To: pianotech at ptg.org Subject: Re: very strange tuning mechanism Date: Wed, 23 Jul 2008 08:26:42 -0600 Hi Were the MICRO pins smaller? No pun intended. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ------------------------------------------------------------------------------ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080723/65b4539d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC