chickering quarter grand -re-scale trichords

CHARLES BECKER cbeckercpt at verizon.net
Tue Jul 22 05:58:25 MDT 2008


Most informative and helpful.  This list rocks!
  ----- Original Message ----- 
  From: Fenton Murray 
  To: Pianotech List 
  Sent: Monday, July 21, 2008 3:18 PM
  Subject: Re: chickering quarter grand -re-scale trichords



    ----- Original Message ----- 
    From: CHARLES BECKER 
    To: Pianotech List 
    Sent: Monday, July 21, 2008 4:44 AM
    Subject: Re: chickering quarter grand - damper configuration


    Kendall
    thank you for your response.  I did not receive the lengthy post you referred to but your last post answered my question.  The fact that the suppliers offer a thinner felt for  wound tri-cords is good to know.
      ----- Original Message ----- 
      From: Kendall Ross Bean 
      To: 'Pianotech List' 
      Sent: Monday, July 21, 2008 4:08 AM
      Subject: RE: chickering quarter grand - damper configuration


      Charles~

      Correction. On my previous, lengthy post to you I wrote:

      "This one (Scale 133) had the standard single and bichord wedges on both front and rear of the damper heads in the bass."

      What I meant was it "...had the standard single, bichord, and TRICHORD wedges on both front and rear of the damper heads in the bass."

      (As opposed to all pads in the rear as on the Scale 121 of earlier years.)

      -Apparently by 1915 Chickering decided they needed more wedges, especially in the bass.

      ~Kendall Ross Bean

      PianoFinders
      www.pianofinders.com
      e-mail: kenbean at pianofinders.com

      Connecting Pianos and People



--------------------------------------------------------------------------
      From: CHARLES BECKER [mailto:cbeckercpt at verizon.net] 
      Sent: Sunday, July 20, 2008 6:46 AM
      To: Pianotech List
      Subject: chickering quarter grand


      While the minds are on the chickering quarter grand,  what is the correct damper felt configuration for the wound tri-cords below and above the break.  This particular piano had the damper felts replaced but the tech used flat felts front and back on the wound tri-cords.  This can't be correct.  Needless to say, this one is a bleeder.  any help would be appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080722/d6da9f30/attachment-0001.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC