No, material error. There are some fiber reinforced larger, thicker wheels that are really very tough. They cut fast and last a long time. Actually you'll just wear them down smaller rather than break them. dp David M. Porritt, RPT dporritt at smu.edu -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Phil Bondi Sent: Monday, July 07, 2008 6:27 PM To: Pianotech List Subject: Re: Becket breaker? - Technique Porritt, David wrote: > Does no one else cut strings with a Dremel tool? I take tension down a > turn (well I did the last time I did any belly work) and then cut the > strings with the cutting wheel with a Dremel tool. Very fast! > David, I tried that. I was going through wheels like crazy. Operator error?
This PTG archive page provided courtesy of Moy Piano Service, LLC