The Renner cloth is cut over size and needs to be trimmed. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Richard Brekne" <ricb at pianostemmer.no> To: <pianotech at ptg.org> Sent: Sunday, January 13, 2008 7:34 AM Subject: flange bushing > I see I did use the word "cut". In fact I do tear... much quicker to > begin with. That said I suppose if you have a very accurate cutting > device it shouldn't make all that much difference. The pre-cuts one > gets from Renner don't seem to have a problem lacking a rough side. > Don't really know when you first mention it. > > I always try and twist the bushing a tad so the joint isn't a straight > line. I'm not really sure that that does any good either :).... but its > what I learned to do so force of habit I suppose. > > Cheers > RicB > > Isn't tearing supposed to be better, if you are making your own? The > rough weave left, intertwines with the opposite side. > > John Ross > Windsor, Nova Scotia, Canada >
This PTG archive page provided courtesy of Moy Piano Service, LLC