Tony: Have you used either of them? And in what applications? And with what results? Paul -----Original Message----- From: Tony Caught <acaught at internode.on.net> To: Pianotech List <pianotech at ptg.org> Sent: Thu, 11 Oct 2007 12:57 am Subject: Re: Glue for laminated rib construction Two glues come to mind. One is a Weldbond gap filling sandable fast tack glue and the other is (Australian Brand ?) Selleys Aquadhere durabond polyurethane type glue. The later is new technology. Dampen one surface to activate glue, clamp for 4 hours for curing. ? Tony Caught Australia 0427 850 737 acaught at internode.on.net ----- Original Message ----- From: Erwinspiano at aol.com To: pianotech at ptg.org Sent: Thursday, October 11, 2007 2:32 PM Subject: Glue for laminated rib construction ? Belly heads ? I've been gluing up my own laminated rib stock & my pinblocks.? I? won't?use epoxy because it too is toxic?to my body?& expensive.? I'm open for suggestions.? ?? I need to glue up a bunch of ribs ?tomorrow.? I like th Bolduc for my pinblocks & bridge cap applications because it doesn't clog drill bits or have adverse affects on tuning torque.? I believe Andre usu to glue up his own blocks & panels. ? Any help? ? Thanks ? Dale See what's new at AOL.com and Make AOL Your Homepage. No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.7/1062 - Release Date: 10/10/2007 5:11 PM ________________________________________________________________________ Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071011/1be5b667/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC