I wouldn't bother. Just get a piece of dowelling, or an old piece of broom stick. Then with one end of the string loose, make a loop, insert dowel, and run it up and down. It moves the loop, and the windings 'twist', and the tone is improved. John M. Ross Windsor, Nova Scotia, Canada jrpiano at win.eastlink.ca ----- Original Message ----- From: Richard Morgan To: pianotech at ptg.org Sent: Tuesday, May 15, 2007 12:27 PM Subject: Bass string enlivening gadget Recently someone posted this description of a tool to enliven bass strings: Piece of 1" conduit, about a foot and a half long. Rubber caps on both ends. Drill through it 2 , 1/4" holes, a few inches apart. Mount sliding-door track nylon wheels ( with bearings! ) from Lowe's, Home Depot, etc.. Unhitch strings on one end, put through wheels' grooves in long "s" curve, push conduit-gadget back and forth, up and down length of string. Much less scary than scraping metal! No loose windings. Nylon grooves on wheels protect strings. I'm having trouble envisioning it enough to construct it. Might someone have a picture of such a gadget? I assume the wheels are mounted in the 1/4" holes, and the wheels are in the same plane--i.e. a straight line? Actually, as I framed the last question, I may have solved my dilemma, but would still love to have confirmation from someone, preferably including visual. Thanks, Richard Morgan ------------------------------------------------------------------------------ Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070515/552d034f/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC