I believe that a lot of these stringing jigs are made at the chapter level. I know that ours was. It should be possible for them to be made with an angled hitch pin. Terry B. At 04:57 PM 5/3/2007 -0600, you wrote: >There's one big difference about the stringing jig: that darned vertical >hitch pin. > >I did a great splice, went back and neatened up the coil... and then lost >a point, because the string wasn't seated around that vertical >pin. Touching the wire at all after seating can make it walk up again... >something you don't have in The Real World with an angled hitch >pin. (This was one of the very few Non-Real-World items in the tech test, >by the way). > >--Cy-- > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070503/82bb9ac1/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC