"Might make things a little tough if that plate ever has to come out again....." Why would that be? Block is epoxied to plate. Plate/block assembly is screwed/bolted to rim. Undo screws/bolts and remove plate/pinblock assembly. No sweat mate! Or not? Terry Farrell ----- Original Message ----- > (snip) For that matter, why not just epoxy the entire block to the plate > (at least > on pianos where the block is not mortised into the rim), and epoxy > Delignit > bushings in (to the block and to the plate). That would sure make things > > nice and solid. > > Might make things a little tough if that plate ever has to come out > again..... > > Paul E. Dempsey, RPT
This PTG archive page provided courtesy of Moy Piano Service, LLC