Hi Ron, I certainly would not let down the tension to tighten coils. With respect, I have measured the difference in unison stability with sloppy coils. There is a small but measureable difference, after lifting coils and tapping them down to form nice tight coils on upright pianos that are 50 years old and equipped with humidity control systems. I routinely check each new client's piano by testing three pins. If there is no pitch drop then I accept the coils. If any of the three change pitch then I take the time to address the coils. At 09:02 AM 3/25/2007 -0600, you wrote: > >> I have a Steinway M in my care that has been restrung/rebuilt. The >> coils on the tuning pins are not drawn up tight, as I would expect. Can >> this have an effect on stability? Does it affect anything else? Would >> there be any advantage (several years after the restringing--don't know >> how many) to backing off the tension, and retighten while lifting the >> coils? Or would it be best to leave everything alone and just tune it? >> >> Richard Morgan > >No effect on stability, once they are settled in. It's just >ugly and sloppy looking. I'll guess the tuning pins are >leaning WAY back at the magic 7° or more? Unless the looks of >it bothers the owner, I'd leave bad enough alone. >Ron N > > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.5.446 / Virus Database: 268.18.17/731 - Release Date: 3/23/2007 3:27 PM > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. Non calor sed umor est qui nobis incommodat mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK, S4S 5G7 306-539-0716 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC