>Do you use it in what would be to me an "upside down" orientation, >that is flat unbeveled side up? Yes, the flat side is faced upwards. The beveled side was ground into a curve. With the curved side against the bridge surface, the notch is shaped with a sweep; the curved surface of the chisel facilitates a curvature to the notch. Automatic curve as it were. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070318/d7ff4fb7/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC