I just got a string cover that I ordered from Schaff, and there are no wooden braces (like someone had suggested). Any suggestions on getting a proper fit/trim? Brian P. Doepke AAA Piano Works, Inc. Piano Tuning-Repair-Purchase Consults 260-432-2043 260-417-1298 www.aaapianoworks.com _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Friday, March 09, 2007 6:00 PM To: pianotech at ptg.org Subject: STRING COVER+FIRMER TOUCH >Mostly on the naturals to effect a -6g FW to even the touch >between the sharps and naturals. This means that if the FW is 11, back leading make the FW 5g. The naturals are fairly consistent so it's only a matter of drilling a hole at the same spot on each key. For A0 and C8, I install back lead to make the FW equal to the rest, either one lead further out on the key or two leads. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070309/fe7a4f29/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC