>Mostly on the naturals to effect a -6g FW to even the touch >between the sharps and naturals. This means that if the FW is 11, back leading make the FW 5g. The naturals are fairly consistent so it's only a matter of drilling a hole at the same spot on each key. For A0 and C8, I install back lead to make the FW equal to the rest, either one lead further out on the key or two leads. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070309/3ce2aa55/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC