----- Original Message ----- > Has anyone increased the height distance on their > bandsaw to accomodate taller stock? > SNIP > > This is so I can slice a pinblock to make capping > material for a delignit cap on multilam pinblock. SNIP > Bob Hull I can't comment on the riser thing as I've never done it. My bandsaw easily handles a pinblock. But what I can do is help you or anyone else out with your Delignit-capped Multilam pinblock needs until you do attain sawing & laminating capability. Let me know if I can help. Terry Farrell Farrell Piano www.farrellpiano.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070304/44f5d8ea/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 63729 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20070304/44f5d8ea/attachment-0001.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC