Wanting to do it right

[John Ross]

Definitely do NOT use WD40.
John M. Ross
Windsor, Nova Scotia, Canada
jrpiano at win.eastlink.ca
  ----- Original Message ----- 
  From: Steven Hopp 
  To: pianotech at ptg.org 
  Sent: Wednesday, July 18, 2007 5:54 PM
  Subject: Wanting to do it right


  Hello all,

  I guess I am writing this as a vent rather than a request.  I work for a well known piano dealer in my area who's business has been around for over 30 years.  I do some warranty tunings and some repair.  The owner has been like gold to me.  Helping me whenever he can.  Allowing me to work on my own projects in his shop.  Of course he gets floor and warranty tunings at a discount so it is very win win.  However,  when it comes to some things he wants me to cut corners.  For example, I just did a warranty tuning for a piano he delivered and it was 100 cents flat.  I pulled it up to pitch and did two tunings that day and plan to do go work on it again as it is already going flat.  Typical for such a piano.  However, he wanted me to leave it flat and just do a "touch up" on the tuning.  Also several of the high treble hammers and one of the bass hammers were sluggish and need some attention.  I couldn't give it at that time but he now says just spray it with some WD-40 and it will be fine.  There are other things that he wants me to do that I just won't do.  I need this association but how do you tell the guy you won't do some things and still get paid?  If I had left the piano flat and the lady eventually called another tuner for whatever reason - I would look like the moron not him.  Just a note in my life.  Any thoughts and or empathy are welcome.  

  Steven


------------------------------------------------------------------------------
  Need a brain boost? Recharge with a stimulating game. Play now!  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070718/df91e49a/attachment.html