Stripped screw hole repair CA

[paul bruesch]

That'd be like ca-ca paper and ca.

On 7/15/07, Joe And Penny Goss <imatunr at srvinet.com> wrote:
>
>  Hi all,
> Yesterday I did a repair on a stripped screw hole on a Stark console.
> The legs were held in place with three screws all of which were loose.
> One leg had oversize screws that were again very loose to not holding at
> all.
> As usual I used CA in the hole to firm up the wood and all but the loosest
> was good to go.
> On the loosest ( the largest screw ) I filled the hole with toilet paper
> pushing it in place with
> my capstan tool tip so that a screw way was created. Then added CA until
> all was moist with CA.
> Waited 15 seconds and attached the legs.
> All screws were able to be tightened as if the hole was new.
>
> Joe Goss RPT
> Mother Goose Tools
> imatunr at srvinet.com
> www.mothergoosetools.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070715/5c2fd51a/attachment.html