Tuning sequence question

[Cy Shuster]

I believe TuneLab's overpull is designed to do all the strings in one pass with no mutes, A0 to C8.  I check both "Measure every note" and "Instant Measuring", and it gives me great results, usually within three cents or so (assuming I'm within 10 or 15 cents to start).  With the spectrum display, you need no mutes.  I bang the first pass in under 20 minutes.

--Cy--
  ----- Original Message ----- 
  From: ITUNEPIANO at aol.com 
  To: pianotech at ptg.org 
  Sent: Sunday, July 08, 2007 7:57 PM
  Subject: Re: Tuning sequence question


  On a tunelab overpull tuning, I start at the low bass, and tune center strings to C-8.   Then I tune unisons.  I do this to save battery power, more than anything else.  Bob. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070708/3b165d53/attachment.html