Well, no I'm not the guilty party, but the client is not willing to foot the bill for the real solution. So I'm off to explore in the land of lacquer. Alan _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Erwinspiano at aol.com Sent: Wednesday, November 01, 2006 5:14 PM To: pianotech at ptg.org Subject: Re: Flushing over-lacquered hammers Well unless you are the one that just applied too much lacquer & are trying to back track then agree with the toilet treatment suggested by others. I'm sorry, reality being what it is,...is real. It just doesn't work & if it does you don't get very far. Or you may be able to get the needles in to create some psuedo change but don't expect miracles & if you do it's better to be lucky than good on that day.KWIM ? If you ARE the one in control from the git go & the juice, be it plastic, lacquer,or whatever, then It is possible to wash some of it down lower in the hammer. Most of the time toooo much lacquer has been applied from the git go by inexperience & anxious voicer syndrome. Dale Oh, Mr. Erwin? Somebody just called your number....tell 'em how it's done, brother. xoxxoDA On Nov 1, 2006, at 7:32 AM, Alan McCoy wrote: > Hi Folks, > > No I'm not (yet) thinking of flushing these lacquer briquettes down > the > toilet. But I would like to hear from anyone who has dealt > successfully with > such hammers. I'm thinking that flushing with acetone might do the > trick. > Anyone want to share techniques that worked? > > Thanks for any responses. > > Alan > > --Alan McCoy, RPT > Inland Northwest Chapter > Spokane, WA > ahm at webband.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061101/fd837a1b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC